BuildersCount

Concrete Weight per m³ in kg and kN

A cubic metre of set concrete weighs about 2,400 kg. Type an amount or measure a slab to see its weight.

By BuildersCount · Last checked 14 Oct 2026 · Our sources

Type an amount

Which concrete?

2,400 kg per m³: Eurocode 1's figure for plain concrete once it has set. Cemex gives about 2.4 tonnes.

It is in

We start at 2,400 kg per m³ for set concrete (Eurocode 1). No extra is added. Pick wet or reinforced above.

Your answer

That is about
2.4tonnes

1 m³ of concrete, set (2,400 kg).

Volume

  • m³1
  • Litres1,000

Weight

  • kg2,400

If you buy bags

100
bags of 20 kg

This answer is a guide. The real weight changes with the mix and its water. For anything that holds weight, check your local building rules or ask a builder or engineer.

Save or share

Quick answers

Weight of a cubic metre of concrete
About 2,400 kg, or 2.4 tonnes, once set. Wet concrete is about 2,500 kg.
Concrete in kg/m³ and kN/m³
2,400 kg/m³ is 24 kN/m³ for plain concrete. Reinforced concrete is 25 kN/m³, about 2,500 kg/m³.
A 3 × 3 m slab, 100 mm thick
0.9 m³ of concrete, so about 2,160 kg (2.16 tonnes) once set.
Bagged concrete, once set
At least 2,200 kg per m³, says Kilsaran's data sheet for its bagged mix.

How to work it out

  1. Measure the length, width and thickness. Change the thickness from mm to metres.
  2. Multiply length × width × thickness. This gives cubic metres (m³).
  3. Multiply the m³ by 2,400. That is the weight in kg once set.
  4. Divide by 1,000 for tonnes. For wet or reinforced concrete, use 2,500 kg.

3 m × 3 m × 0.1 m = 0.9 m³
0.9 × 2,400 = 2,160 kg
2,160 ÷ 1,000 = 2.16 tonnes

Concrete weight per m³: kg, tonnes and kN/m³

Concrete has no single average weight. The mix, its water and any steel all change it. Here are the figures we use, and who gives them.

Weight of 1 m³ of concrete
Concretekg/m³TonneskN/m³Who says so
Plain concrete, set2,4002.424Eurocode 1; Cemex says about 2.4 t
Fresh (wet) concrete2,5002.525Eurocode 1: +1 kN/m³
Reinforced, with steel bars2,5002.525Eurocode 1: +1 kN/m³
Bagged mix, set2,200+2.2+22+Kilsaran data sheet

Kilsaran's figure is for its bagged mix once set. The others are for plant (ready-mix) concrete.

What our calculator uses: 2,400 kg per m³ to start. That is the European design code's figure for plain concrete once set. Cemex, a UK ready-mix maker, gives the same: about 2.4 tonnes.

From kg to kN/m³ (unit weight or specific weight)

Engineers give concrete's weight in kilonewtons per m³ (kN/m³). Eurocode 1 rounds gravity to 10. So each kN/m³ is 100 kg per m³, and 2,400 kg is 24 kN/m³.

We use that one rule on this page. VSB, a Czech technical school, shows the same sum: 2,500 kg per m³ is 25 kN/m³.

In US units, set concrete is about 150 lb per cubic foot (pcf).

How much does a concrete slab or pad weigh?

A slab's weight depends on its area and its thickness. Each square metre weighs this much at the UK thicknesses we found:

Weight of each m² of slab
ThickUsed forSet (2,400 kg/m³)Wet (2,500 kg/m³)
75 mmShed base180 kg188 kg
80 mmBed for patio slabs192 kg200 kg
100 mmFloor, garage or car drive240 kg250 kg
150 mmVans or heavier360 kg375 kg

Thickness from Heidelberg (shed base), Cemex (patio bed), Approved Document C and NHBC (floors), and Pavingexpert (drives). Our thickness page says more.

So a whole slab can weigh several tonnes. These sizes are only examples:

Slab weights at 2,400 kg per m³
SlabThickm³Weight
Shed base 3 × 2.4 m75 mm0.541,296 kg (1.3 t)
Single garage floor 6 × 3 m100 mm1.84,320 kg (4.3 t)
Car drive 10 × 3 m100 mm37,200 kg (7.2 t)

Nothing extra added. Our calculator gives the same answer: tap "Measure instead" and type the dimensions.

To pick a thickness, see our concrete slab thickness guide.

Concrete weight chart: litres, barrows and lorry loads

This chart turns common amounts into weight. Each figure is worked out from 2,400 kg (set) and 2,500 kg (wet) per m³.

What amounts of concrete weigh
AmountSetWet
1 litre2.4 kg2.5 kg
What one 20 kg bag makes (0.01 m³)24 kg25 kg
A barrow load (1/35 m³)69 kg71 kg
0.5 m³1,200 kg1,250 kg
1 cubic yard (0.76 m³)1,835 kg1,911 kg
1 m³2,400 kg2,500 kg
1.5 m³3,600 kg3,750 kg
5 m³12 tonnes12.5 tonnes
A 7 m³ lorry load16.8 tonnes17.5 tonnes
An 8 m³ lorry load19.2 tonnes20 tonnes

Blue Circle says one 20 kg bag makes about 0.01 m³. Heidelberg Materials says about 35 barrow loads make 1 m³, and a full load is 7–8 m³.

So a barrow load is about 29 litres. A builder's barrow holds 85–90 litres, so each load fills about a third of it.

A lorry load is weighed wet, as it arrives. See our concrete lorry page for the sizes.

Wet concrete, set concrete and steel

Is wet concrete heavier than dry, cured concrete?

Yes. Fresh concrete still holds water from mixing. As it sets and dries, some of that water leaves. Eurocode 1 adds 1 kN/m³ for unset concrete: about 100 kg more per m³.

So use the wet figure, 2,500 kg, for a lorry or a barrow. Use the set figure, 2,400 kg, for a finished slab.

Reinforced concrete weight

Steel bars add weight. Eurocode 1 adds 1 kN/m³ for a normal amount of steel bars or mesh. That makes 25 kN/m³, about 2,500 kg per m³.

The code's figure is for a normal amount of steel. For a real design, ask an engineer.

Concrete vs water

A m³ of water weighs about 1,000 kg. Set concrete is about 2.4 times as heavy. The water figure comes from the US Bureau of Reclamation.

Questions people ask

How much does a cubic metre of concrete weigh?

About 2,400 kg once set, which is 2.4 tonnes. Cemex, a UK maker, also says about 2.4 tonnes. Fresh concrete weighs about 2,500 kg.

How much does a cube of concrete weigh?

A 1m cube (1 m long, 1 m wide and 1 m high) is 1 m³. It weighs about 2,400 kg once set.

Does concrete lose weight as it cures?

Yes, a little. Eurocode 1 adds 1 kN/m³ for fresh concrete, about 100 kg per m³. That water dries out as it sets.

Does concrete weigh more than water?

Yes, about 2.4 times as much. A m³ of water weighs about 1,000 kg, from the US Bureau of Reclamation's figure.

What is the unit weight of concrete in kN/m³?

24 kN/m³ for plain concrete and 25 kN/m³ with steel bars, in Eurocode 1. Engineers use it for the weight of a slab or beam.

How do I calculate the weight of a concrete slab in kg?

Work out the m³: length × width × thickness, in metres. Then multiply by 2,400. A 3 × 3 m slab, 100 mm thick, weighs about 2,160 kg.

What volume of concrete weighs a tonne?

About 0.42 m³ of set concrete. That is 1,000 kg ÷ 2,400 kg per m³.

Where our numbers come from

Made by BuildersCount. Last checked 14 Oct 2026.

Cite this page

BuildersCount. (2026, October 14). Concrete Weight per m³ in kg and kN. https://builderscount.com/uk/concrete-weight/