BuildersCount

Weight of Concrete in NZ

Find what concrete weighs by the m³, litre, barrow, slab or truck. We start at 2,400 kg per m³ for fresh ready-mix.

By BuildersCount · Last checked 14 Oct 2026 · Our sources

Type an amount

Which weight?

2,400 kg per m³: the top of Allied Concrete's 2,300–2,400 kg for wet ready-mix.

It is in

Your answer

That is about
2,400kg

1 m³ of concrete, fresh ready-mix.

Volume

  • m³1
  • Litres1,000

Weight

  • Tonnes2.4

If you buy bags

100
bags of 25 kg
63
bags of 40 kg

This answer is a guide. Real weights change with the mix and its water. For anything that holds weight, check your local building rules or ask a builder or engineer.

Save or share

Quick answers

Weight of 1 m³ of concrete
About 2,400 kg, or 2.4 tonnes, when fresh. Allied Concrete gives 2,300–2,400 kg for its wet ready-mix.
Wet concrete vs set concrete
The Eurocode puts set concrete at 2,400 kg per m³, and wet at about 100 kg more. Allied's wet ready-mix is 2,300–2,400 kg.
Reinforced concrete weight per m³
About 2,500 kg, or 25 kN/m³. That is the Eurocode figure with a normal amount of steel.
A wheelbarrow of concrete
About 69 kg. We found no NZ figure, so this uses a UK maker's 35 barrows per m³.
A full truck of concrete
About 14.4 tonnes of concrete in a 6 m³ truck. The truck itself is extra.

How to work it out

  1. Find the volume: length × width × thickness, all in metres.
  2. Multiply by 2,400 kg per m³ for fresh concrete.
  3. Divide by 1,000 to get tonnes.
  4. For set concrete, the Eurocode uses 2,400 kg. With steel bars, use 2,500 kg.

A 3 × 3 m pad, 100 mm thick:
3 × 3 × 0.1 = 0.9 m³
0.9 × 2,400 = 2,160 kg
2,160 ÷ 1,000 = 2.16 tonnes

Concrete weight per m³: chart

This chart shows what fresh concrete weighs, from a litre to a full truck. We worked out each row from Allied Concrete's 2,300–2,400 kg per m³.

What fresh concrete weighs
AmountAt 2,300 kg/m³At 2,400 kg/m³
1 litre2.3 kg2.4 kg
1 wheelbarrow (UK count)65.7 kg68.6 kg
1 m³2,300 kg (2.3 tonnes)2,400 kg (2.4 tonnes)
1 cubic yard1,758 kg (1.76 tonnes)1,835 kg (1.84 tonnes)
2.4 m³ (big mini-mix load)5,520 kg (5.52 tonnes)5,760 kg (5.76 tonnes)
6 m³ (full truck)13,800 kg (13.8 tonnes)14,400 kg (14.4 tonnes)

The barrow uses a UK maker's 35 barrows per m³. Mini-mix trucks carry up to about 2.4 m³.

So 1 m³ of concrete weighs about 2,300 to 2,400 kg. That is 2.3 to 2.4 tonnes.

Weight of a concrete slab per m²

A slab's weight depends on how thick it is. This table shows one square metre, and a whole 3 × 3 m pad, at 2,400 kg per m³.

Slab weight at 2,400 kg per m³
ThicknessPer m²3 × 3 m pad
75 mm180 kg1,620 kg (1.62 tonnes)
100 mm240 kg2,160 kg (2.16 tonnes)
150 mm360 kg3,240 kg (3.24 tonnes)

A Concrete NZ guide gives 75 mm for a path. BRANZ gives 100 mm for a house slab under NZS 3604.

Why concrete weights differ

You will see 2,300, 2,400 and 2,500 kg per m³. Each one is fair. They just weigh different things.

Concrete weight by type, per m³
Typekg per m³kN per m³
Fresh ready-mix (Allied Concrete)2,300–2,400 kg23–24 kN
Fresh bag mix (Firth CivilCrete)About 2,350 kg23.5 kN
Plain concrete, set (Eurocode)2,400 kg24 kN
Plain concrete, wet (Eurocode)2,500 kg25 kN
Set, with steel bars (Eurocode)2,500 kg25 kN

kN/m³: kg × 10 ÷ 1,000, as the Eurocode does. Set and steel figures are about.

  • Fresh ready-mix: Allied Concrete, a NZ plant, gives 2,300–2,400 kg in its safety sheet.
  • Bag mix: Firth says its CivilCrete bag mix weighs about 2,350 kg per m³ when wet.
  • Eurocode rows: these come from the European design code, Eurocode 1. We found no NZ code figure we could read.

Allied's wet ready-mix is no heavier than the code's set figure. Mixes differ, so use your plant's figure if it gives one.

Our calculator starts at 2,400 kg, the top of Allied's range for wet ready-mix. Tap "With steel" for 2,500 kg. When you plan a load, the higher figure keeps you safe.

Engineers call the weight of 1 m³ the unit weight, specific weight or self weight. They often write it in kN/m³.

Wet concrete and reinforced concrete weight

Fresh concrete still holds its mixing water. So wet concrete weighs a little more than set (dry) concrete.

The Eurocode puts plain set concrete at 2,400 kg per m³. It adds about 100 kg for wet concrete, so 2,500 kg. Allied's own wet ready-mix is lighter, 2,300–2,400 kg. Use a wet figure for a truck or a barrow. Use the set figure for the finished slab.

Reinforced concrete weight per m³

Steel bars and mesh make concrete heavier. The Eurocode puts plain set concrete at 24 kN/m³. It adds 1 kN/m³ for a normal amount of steel.

So reinforced concrete is 25 kN/m³, or about 2,500 kg per m³. A university course on the code gives the same 2,500 kg.

Concrete weight in kN/m³

Engineers often use kN/m³, not kg. The Eurocode takes 1,000 kg as about 10 kN. So 2,400 kg per m³ is about 24 kN/m³.

For a floor, beam or wall that carries weight, check your local building rules or ask a builder or engineer.

Bags of concrete: weight and what they make

A bag of concrete mix weighs what its label says. Add water, and it makes concrete. Dricon gives what each of its bags makes.

Dricon concrete bags
BagMakesBags per m³
20 kg (post-hole mix)0.008 m³ (8 litres)125
25 kg0.01 m³ (10 litres)100
40 kg0.016 m³ (16 litres)63

Bags per m³ are rounded up to whole bags.

So 1 m³ of concrete takes 100 bags of 25 kg. Need a count for your job? Try our concrete bag calculator.

Before you move or lift concrete

  1. Work out the volume. Use "Measure instead" in the calculator.
  2. Pick the weight. For a truck or a barrow, keep "Fresh ready-mix".
  3. Check the most your trailer can carry on its plate. Stay under it.
  4. A full NZ truck holds about 6 m³. That is about 14.4 tonnes of concrete. A 2.4 m³ mini-mix load is about 5.8 tonnes.
  5. See how much a truck holds on our concrete truck capacity page.

Questions people ask

How much does 1 m³ of concrete weigh?

About 2,400 kg when fresh, says Allied Concrete's safety sheet. Its range is 2,300–2,400 kg. Builders often call a cubic metre a "cube".

How much does concrete weigh?

About 2.4 kg a litre, or 2.4 tonnes a cubic metre. That is fresh ready-mix at Allied's top figure, and set concrete by the Eurocode.

How much does a wheelbarrow of concrete weigh?

About 66–69 kg. A UK maker, Heidelberg Materials, says 1 m³ is about 35 barrow loads. We found no NZ figure.

How much does a yard of concrete weigh?

About 1,758–1,835 kg. A cubic yard is 0.76 m³. NZ plants sell by the cubic metre.

What is the weight of concrete in kN/m³?

About 24 kN/m³ at 2,400 kg. The Eurocode uses 24 kN/m³ for plain concrete and 25 with steel.

Is wet concrete heavier than set concrete?

Yes, a little. Its mixing water has not dried out yet. The Eurocode adds about 100 kg per m³: 2,400 kg set, 2,500 kg wet.

How much does reinforced concrete weigh?

About 2,500 kg per m³, or 25 kN/m³. The Eurocode adds 1 kN/m³ (about 100 kg) for a normal amount of steel.

Where our numbers come from

Made by BuildersCount. Last checked 14 Oct 2026.

Cite this page

BuildersCount. (2026, October 14). Weight of Concrete in NZ. https://builderscount.com/nz/concrete-weight/