Concrete Slab Thickness Guide
Pick your job to see how thick the concrete and the hardcore under it should be. Add your size to work out how much you need.
Pick your job
Your size (if you want amounts)
Your answer
- ConcreteHeidelberg Materials shed base guide75 mmat least 75 mm
- Hardcore or Type 1Heidelberg Materials shed base guide75 mm75–100 mm
For 7.5 m²
- Concrete62 bags of 20 kg0.619 m³, 1.49 tonnes
- Hardcore or Type 10.823 m³ loose, 1.29 tonnes
25 mm thicker adds 0.206 m³ of concrete (0.495 tonnes).
These depths are a guide. We add 10% extra to each layer. For a floor or drive, check your local building rules or ask a builder or engineer.
Quick answers
- Shed base
- At least 75 mm of concrete on 75–100 mm of hardcore, says Heidelberg Materials.
- Patio slabs
- A concrete bed of 50–80 mm on 50–80 mm of hardcore, says Cemex.
- Garage or house floor
- At least 100 mm. NHBC puts a garage floor on at least 100 mm of hardcore.
- Concrete drive
- 100 mm for cars and 150–200 mm for vans, says Pavingexpert, a trade guide. We found no official UK figure.
How to work it out
- Pick the job. That gives the thickness of the concrete and the hardcore.
- Measure the length and width in metres. Multiply them for the area in m².
- Multiply the area by the thickness in metres (mm ÷ 1,000). This gives m³.
- Add 10% extra for spills and dips.
- For 20 kg bags, divide the m³ by 0.01. Round up.
Shed base 3 × 2.5 m, 75 mm thick:
3 × 2.5 × 0.075 = 0.563 m³
0.563 + 10% = 0.619 m³
0.619 ÷ 0.01 = 61.9 → 62 bags
Hardcore, 75 mm: about 0.82 m³ loose, 1.29 tonnes
Concrete slab thickness by job (UK)
The right thickness depends on what will stand on the slab. These are typical UK figures for homes (residential jobs), not industrial floors.
| Job | Concrete | Under it | Mix | Who says |
|---|---|---|---|---|
| Shed base | 75 mm or more | 75–100 mm hardcore | ST4 | Heidelberg |
| Patio slabs (concrete bed) | 50–80 mm | 50–80 mm hardcore | – | Cemex |
| Garage floor | 100 mm or more | 100 mm or more hardcore | ST4 | NHBC |
| House floor (oversite) | 100 mm or more | up to 600 mm hardcore | ST3 | Approved Document C |
| Car drive | 100 mm | no UK figure found | PAV1 | Pavingexpert |
| Vans or heavier | 150–200 mm | no UK figure found | PAV1 | Pavingexpert |
Mixes: Heidelberg Materials for bases and floors; PAV1 for drives is the Concrete Society's mix for house drives. Approved Document C is the building rules guide for England.
A drive has the least official advice: we found no UK requirement. Pavingexpert is a trade website, not a rule book. For steel mesh, see our slab calculator.
For a floor, a drive or anything that holds weight, check your local building rules. Or ask a builder or engineer.
How deep should a concrete slab be? Dig for both layers
The concrete sits on a layer of hardcore or MOT Type 1, packed down hard. This is the sub-base. So you dig for both layers.
- Shed base (the shed's foundation): B&Q digs 150 mm: 75 mm of Type 1 and 75 mm of concrete. Heidelberg uses 75–100 mm of hardcore.
- Garage floor: NHBC asks for at least 100 mm of hardcore under 100 mm of concrete.
- House floor: Approved Document C allows up to 600 mm of hardcore. Your builder sets the depth.
- Patio: Cemex lays 50–80 mm of hardcore under the concrete bed.
Heidelberg also makes the base 100 mm wider and longer than the shed. Its guide adds a layer of sand and a damp-proof sheet under the concrete.
Loose Type 1 takes about 33% more room than packed, says a Penn State road guide. So the calculator shows the loose amount to order. Our Type 1 calculator starts with no extra, so it shows a little less.
What 25 mm thicker adds
A thicker slab needs more concrete. This table is for a 4 × 2.5 m slab (10 m²), with 10% extra, as the calculator works it out.
| Thick | m³ | 20 kg bags | Weight, set |
|---|---|---|---|
| 75 mm | 0.83 | 83 | 2 t |
| 100 mm | 1.1 | 110 | 2.6 t |
| 125 mm | 1.38 | 138 | 3.3 t |
| 150 mm | 1.65 | 165 | 4 t |
| 200 mm | 2.2 | 220 | 5.3 t |
Weight at 2,400 kg per m³ once set. Bags: Blue Circle says one 20 kg bag makes about 0.01 m³.
Each extra 25 mm adds about 0.27 m³ here. Our 10% extra is from Sakrete, a US bag maker. We found no UK figure.
To price it, use our concrete slab calculator. It shows bags or a ready-mix lorry, and which costs less.
Thin concrete: patios and small pads
Cemex lays patio slabs on a concrete bed 50–80 mm thick. That bed only holds the slabs. It is not a slab to walk on by itself.
Marshalls lays its patio slabs on a mortar bed instead, 30–40 mm thick. It mixes 3–4 parts sand to 1 part cement, on a 100 mm sub-base. Our sand and cement calculator works out that mix.
How thick should a small concrete slab be?
The thinnest slab figure we found is 75 mm, for a shed base. Cemex and B&Q both say about the same. We found no UK source for anything thinner.
We also found no UK thickness for a concrete path, footpath, pavement or walkway. Ask a builder.
Before you dig
- Pick the job above and note both layers.
- Mark out the area. For a shed, add 100 mm all round.
- Dig deep enough for the hardcore and the concrete together.
- Pack the hardcore down in layers.
- Ask for the right mix: ST4 for a base, PAV1 for a drive. Cemex says ST4 is about 1:1.5:3 cement to sand to stone.
- For a floor or drive, check your local building rules or ask a builder or engineer.
Questions people ask
How thick should concrete be for a driveway?
Pavingexpert, a trade guide, says 100 mm for cars and 150–200 mm for vans or heavier use. We found no official UK figure for drives.
How thick should a concrete shed base be?
At least 75 mm, says Heidelberg Materials, on 75–100 mm of packed-down hardcore. Cemex says about 3 inches of each.
How deep should a concrete shed base be?
B&Q digs 150 mm for most sheds. That leaves room for 75 mm of MOT Type 1 and 75 mm of concrete.
How thick should a concrete floor be?
At least 100 mm for a house floor, says Approved Document C. NHBC asks for at least 100 mm too, and 100 mm for a garage floor.
How thick should a concrete slab be?
There is no single average: it depends on the job. A shed base needs 75 mm, and a floor or car drive 100 mm. Vans need 150–200 mm.
Can you pour concrete 2 inches (50 mm) thick?
Only as a bed under patio slabs: Cemex says 50–80 mm. Every UK slab figure we found is 75 mm or more.
Where our numbers come from
- Shed base: Heidelberg Materials guide (75 mm concrete minimum)
- Shed base: Cemex guide (about 3 in concrete, 3 in hardcore)
- Shed base: B&Q guide (75 mm concrete on 75 mm Type 1)
- Patio build-up: Cemex guide to garden walls and paving
- House floors: Approved Document C (at least 100 mm)
- Floor slabs: NHBC Standards 2024, chapter 5.1 (at least 100 mm)
- Garage floors: NHBC Standards 2026, chapter 10.1 (at least 100 mm)
- Concrete drives: Pavingexpert (a trade guide; 100 mm for cars, 150–200 mm for heavier use)
- Full loads, barrows and mixes: Heidelberg Materials UK merchant guide
- Drive mix: Concrete Society (PAV1 for house drives)
- Cement in each mix: Cemex ST mixes (kg of cement per m³)
- Marshalls: how to build and lay a patio
- Marshalls: Indian sandstone laying details (2020)
- Bag size: Blue Circle Multi-Purpose Concrete data sheet (20 kg makes about 0.01 m³)
- Type 1 weight and price: Wickes 800 kg bag (checked Oct 2026)
- Packing down: Penn State road-stone guide (8 in loose packs to 6 in)
- Eurocode concrete weight 24 kN/m³, +1 reinforced, +1 wet: NSC
- Extra for spills: Sakrete slab calculator (10%)
Made by BuildersCount. Last checked 14 Oct 2026.
How we work out our numbers About us Found a mistake? Tell us
Cite this page
BuildersCount. (2026, October 14). Concrete Slab Thickness Guide. https://builderscount.com/uk/concrete-thickness/