How Much Concrete Does a Truck Hold in the UK?
A full ready-mix lorry holds about 7–8 m³. Type your amount, or measure your slab, to count the lorries.
How much concrete?
Your answer
10 m³. Lorry: Full lorry (8 m³).
- Order10 m³
- Last lorry2 m³
Orders under 4 m³ only: MyBuilder, a cost guide, says these often cost £30–£60 more per m³. No supplier we found publishes a fee, so we add none, as our concrete calculator does.
This answer is a guide. Ask the supplier what its lorries carry and its smallest load. For a slab or drive, check your local building rules or ask a builder or engineer.
What it costs
Ready-mix: the middle of 7 prices from 4 UK suppliers (Oct 2026), with VAT. Delivery and any minimum charge are extra.
Quick answers
- Concrete truck capacity in m³
- A full load is 7–8 m³, says Heidelberg Materials. Its drum lorries come in 6 and 8 m³ sizes.
- Mini-mix lorry
- 1–4 m³ a load, for small orders or tight access (Heidelberg).
- Mix-on-site lorry
- Up to 8–10 m³. Some bring as little as 0.25 m³, and one has no minimum.
- Weight of a full load
- About 20 tonnes of wet concrete in 8 m³. Heidelberg says its loaded 8 m³ lorry weighs about 32 tonnes.
- Cost of a truck load of concrete
- About £1,200 for 8 m³, at £150 per m³ with VAT. Delivery and fees are extra.
How to work it out
- Work out the m³ you need: length × width × thickness, in metres. Add some extra.
- Round up to the next 0.25 m³. Suppliers sell by the m³, so we use this step.
- Divide by what one lorry holds: 8 m³ for a full lorry, or 4 m³ for mini-mix.
- Round up. That is how many lorries come. The last one brings what is left.
10 m³ ÷ 8 m³ a lorry = 1.25
Round up: 2 lorries
Last lorry: 10 − 1 × 8 = 2 m³
Concrete lorry sizes and dimensions in the UK
Heidelberg Materials' merchant guide calls 7–8 m³ a full load. There is no one average size. Its truck page gives the measurements below. Our calculator counts 8 m³ as the volume of a full lorry.
| Lorry | Length | Width | Height | Weight loaded |
|---|---|---|---|---|
| Drum lorry, 8 m³ | 9.15 m | 2.55 m | 3.75 m | about 32 t |
| Drum lorry, 6 m³ | 8.7 m | 2.55 m | 3.75 m | about 26 t |
| Mini-mix, 1–4 m³ | 7.6 m | 3 m | 3.6 m | about 18 t |
Heidelberg Materials' figures. Mini-mix lorries serve Scotland, the north of England, north Wales and the West Midlands.
A drum lorry (a truckmixer, or agitator truck) transports concrete mixed at the plant. Heidelberg gives each weight loaded. We found no figure for an empty lorry.
If your supplier's lorries hold 7 m³, a big order may need one more lorry. Ask how it splits the order. In the US, trucks hold 8–12 cubic yards, says the NRMCA, a US trade group.
Lorries for common jobs
| Job | Order m³ | 8 m³ lorries | 4 m³ mini-mix |
|---|---|---|---|
| Shed base 3 × 2.4 m, 75 mm | 1 | 1 | 1 |
| Garage floor 6 × 3 m, 100 mm | 2 | 1 | 1 |
| Car drive 10 × 3 m, 100 mm | 3.5 | 1 | 1 |
| Van drive 10 × 3 m, 150 mm | 5 | 1 | 2 |
| House floor 10 × 8 m, 100 mm | 9 | 2 | 3 |
With 10% extra, rounded up to 0.25 m³, at least 1 m³. Our concrete calculator orders the same. Sizes are examples.
Drum lorry vs mix-on-site (volumetric) truck
A mix-on-site lorry mixes fresh concrete at your job. They are also called volumetric trucks, mobile batch plants or batching trucks. These four suppliers say what their lorries bring:
| Supplier | Most per load | Smallest load |
|---|---|---|
| GPH QuickMix (Aberdeenshire) | about 8 m³ | 0.25 m³ |
| Custom Concrete (Beds, Herts and Bucks) | up to 8.5 m³ | no minimum |
| Eastern Concrete (Suffolk and Norfolk) | up to 8.5 m³ | 0.5 m³ |
| Base Concrete (North London and Herts) | up to 10 m³ | not stated |
From each supplier's own page, checked 14 Oct 2026.
So they carry about as much as a full drum lorry. The big difference is the smallest load. Rock Solid Concrete, a drum lorry supplier, starts at 1 m³ for homes.
What a truckload of concrete costs
Ready-mix costs about £150 per m³ with VAT. That is the middle of 7 prices from 4 UK suppliers. The concrete is only part of the bill.
| Load | Concrete | With fees, as our concrete calculator | Weight, wet |
|---|---|---|---|
| 1 m³ | £150 | £900 | 2.5 t |
| 4 m³ | £600 | £900 | 10 t |
| 7 m³ | £1,050 | £1,200 | 17.5 t |
| 8 m³ | £1,200 | £1,350 | 20 t |
The third column adds £150 delivery, the middle of Checkatrade's £100–£200. It also adds Mister Concrete's minimum charge, £750 with VAT.
- Small loads, under 4 m³: MyBuilder, a cost guide, says these often cost £30–£60 more per m³. No supplier we found publishes a fee, so we add none, as our concrete calculator does.
- Minimum orders: Checkatrade says most suppliers' minimum order is around £500.
For prices by mix, see our concrete cost calculator.
Will the lorry reach? Access, chute and waiting time
Makers ask for a clear gap about 3.5 m wide and 4 m high, on firm ground. Heidelberg's chute reaches about 2.75 m past the back of the lorry.
If it can't get that close, you can barrow the concrete or hire a pump. About 35 barrow loads make 1 m³, says Heidelberg. So an 8 m³ lorry is about 280 barrow trips.
Heidelberg gives 30 minutes to unload for free. MyBuilder says waiting then costs £2–£3 a minute. Have barrows and helpers ready.
Before the lorry comes
- Work out the m³ with our concrete calculator. Add 10% extra.
- Ask what the lorries hold, the smallest load and any small-load fee.
- Check the gate and drive: about 3.5 m wide and 4 m high.
- Ask how far the chute reaches, and if it has extensions. Plan where it or a pump will reach.
- Have tools, barrows and helpers ready before pouring starts.
- For a slab or drive, check your local building rules or ask a builder or engineer.
Questions people ask
How much concrete is in a mixer truck?
A full load is 7–8 m³, says Heidelberg Materials. A mini-mix lorry brings 1–4 m³.
How does a cement mixer truck work?
A ready-mix (drum) lorry brings concrete mixed at the plant. A mix-on-site lorry mixes fresh concrete at your job instead.
How much does a full concrete lorry weigh?
Heidelberg says its 8 m³ lorry weighs about 32 tonnes (32,000 kg) loaded. The wet concrete alone is about 20 tonnes.
What is the smallest load of ready-mix?
Rock Solid Concrete takes home orders from 1 m³. Mix-on-site firms bring less: from 0.25 m³, or with no minimum.
How wide is a concrete lorry?
About 2.55 m across the body, says Heidelberg. Makers ask for a gap about 3.5 m wide and 4 m high.
How long can a concrete lorry wait?
Heidelberg gives 30 minutes to unload for free. MyBuilder, a cost guide, says waiting then costs £2–£3 a minute.
Where our numbers come from
- Full loads, barrows and mixes: Heidelberg Materials UK merchant guide
- Concrete lorry sizes: Heidelberg Materials
- Concrete lorry sizes: Cemex UK (3.5 m wide)
- Volumetric lorry about 8 m³, min 0.25 m³: GPH QuickMix
- Volumetric lorry up to 8.5 m³, no minimum: Custom Concrete
- Volumetric lorry 0.5–8.5 m³: Eastern Concrete
- Volumetric lorry up to 10 m³: Base Concrete
- Rock Solid Concrete price guide (Midlands ready-mix)
- Ready-mix price: the middle of 7 prices from 4 UK suppliers (Oct 2026, with VAT)
- Ready-mix extras: MyBuilder guide (small loads +£30–60 per m³)
- No small-order fee: EasyMix Concrete price page
- Minimum charge: Mister Concrete price page (£625 + VAT)
- Ready-mix delivery and minimum order: Checkatrade cost guide (a third party)
- Small loads: Heidelberg Materials ready-mix pricing guide
- Eurocode concrete weight 24 kN/m³, +1 reinforced, +1 wet: NSC
- Shed base: Heidelberg Materials guide (75 mm concrete minimum)
- House floors: Approved Document C (at least 100 mm)
- Garage floors: NHBC Standards 2026, chapter 10.1 (at least 100 mm)
- Concrete drives: Pavingexpert (a trade guide; 100 mm for cars, 150–200 mm for heavier use)
- Patio build-up: Cemex guide to garden walls and paving
- Extra for spills: Sakrete slab calculator (10%)
- Concrete truck holds 8–12 yd³: NRMCA
Made by BuildersCount. Last checked 15 Oct 2026.
How we work out our numbers About us Found a mistake? Tell us
Cite this page
BuildersCount. (2026, October 15). How Much Concrete Does a Truck Hold in the UK? https://builderscount.com/uk/concrete-truck-capacity/