Concrete Weight Calculator
Concrete weighs about 2,400 kg per cubic metre (m³) once set. Find the weight of any amount or slab, in feet or metres.
Type an amount
Your answer
1 m³ of concrete, normal, set (2,400 kg).
Volume
- m³1
- Cubic yards1.31
- Cubic feet35.31
Weight
- kg2,400
- lb5,291
This answer is a guide. Real weights change with the mix, the stone and the water in it. For anything that holds weight, check your local building rules or ask a builder or engineer.
Save or share
Quick answers
- Weight of 1 m³ (a cube) of concrete
- About 2,400 kg (2.4 tonnes), or 5,291 lb. That is the building code's figure for normal concrete.
- Concrete weight per cubic foot
- About 149.8 lb (68 kg) per cubic foot (cu ft) once set. Wet, about 156.1 lb.
- A cubic yard of concrete weighs
- About 4,045 lb (1,835 kg) once set, and 4,214 lb wet.
- Unit weight in kN/m³
- About 24 kN/m³ for normal concrete and 25 kN/m³ with steel bars. We take 1 kN as 100 kg, as the Eurocode does.
- A 10 × 10 ft slab, 4 in thick
- About 4,994 lb (2,265 kg) once set.
How to work it out
- Find the volume. In feet: length × width × thickness in feet gives cubic feet.
- Multiply the cubic feet by 149.83 lb. Or multiply m³ by 2,400 kg.
- For wet concrete, use 156.1 lb per cubic foot, or 2,500 kg per m³.
- Divide kg by 1,000 for tonnes.
A 10 × 10 ft slab, 4 in thick:
10 × 10 × 0.333 = 33.33 cubic feet
33.33 × 149.83 = 4,994 lb
That is 2,265 kg, or 2.27 tonnes
Concrete weight per m³ and per cubic foot
Concrete has no single or average weight. It changes with the stone, the water and any steel. These are the figures we use, and who gives them.
| Concrete | kg per m³ | lb per cubic foot | kN/m³ | Who says |
|---|---|---|---|---|
| Normal concrete, set | 2,400 | 149.8 | 24 | BC Building Code |
| Fresh (wet) concrete | 2,500 | 156.1 | about 25 | Eurocode (+1 kN) |
| Reinforced (steel bars) | 2,500 | 156.1 | 25 | Eurocode (+1 kN) |
| "Normal" class starts at | over 2,150 | over 134.2 | over 21.5 | CSA A23.3 |
| Lightweight stone mix | 1,600 | 99.9 | 16 | BC Building Code |
kN/m³: we take 1 kN as 100 kg, as the Eurocode does. Each lb figure is worked out from the kg figure.
Which one our calculator uses: it starts at 2,400 kg per m³. The BC Building Code lists that figure for normal concrete. The BC code is based on the National Building Code of Canada.
CSA A23.3, the Canadian concrete design standard, calls concrete "normal" when it weighs over 2,150 kg per m³. So 2,400 kg sits inside that class.
Concrete made with light stone, such as expanded shale, is much lighter. The same code table lists it at 1,600 kg per m³.
Concrete weight chart: feet, yards and m³
This chart shows what common amounts weigh, set and wet. We worked out each one from the figures above.
| Amount | Set (2,400 kg/m³) | Wet (2,500 kg/m³) |
|---|---|---|
| 1 cubic foot | 68 kg (150 lb) | 70.8 kg (156 lb) |
| What one 30 kg bag makes (0.014 m³) | 33.6 kg (74.1 lb) | 35 kg (77.2 lb) |
| 1 cubic yard | 1,835 kg (4,045 lb) | 1,911 kg (4,214 lb) |
| 1 m³ | 2,400 kg (5,291 lb) | 2,500 kg (5,512 lb) |
| A full 9 m³ truck load | 21.6 tonnes | 22.5 tonnes |
A 30 kg bag makes 0.014 m³ of concrete, say Sakrete and Quikrete. The full load is Dufferin's 9 m³.
A cubic yard is 27 cubic feet. So a yard of set concrete weighs 27 × 149.83 = 4,045 lb. That is about 1.83 tonnes.
A full truck load is heavy. The concrete calculator covers truck sizes and what a load costs.
How much does a concrete slab weigh?
A slab's weight depends on its size and how thick it is. At 2,400 kg per m³, each square of slab weighs:
- 100 mm (4 in) thick: about 240 kg per m², or 50 lb per sq ft.
- 125 mm (5 in) thick: about 300 kg per m², or 62 lb per sq ft.
| Slab | Thick | Cubic yards | Weight | In lb |
|---|---|---|---|---|
| Walk 4 × 20 ft | 4 in | 0.99 | 1,812 kg (1.8 t) | 3,995 lb |
| Pad 10 × 10 ft | 4 in | 1.23 | 2,265 kg (2.3 t) | 4,994 lb |
| Car pad 12 × 20 ft | 4 in | 2.96 | 5,437 kg (5.4 t) | 11,986 lb |
| Truck or RV pad 12 × 24 ft | 5 in | 4.44 | 8,155 kg (8.2 t) | 17,979 lb |
Sizes are examples. Wet concrete or steel adds about 100 kg per m³. No extra for spills is added.
How to compute concrete weight by hand
Work out the cubic feet first. Then multiply by 149.83 lb. The calculator does the same sum in feet or metres.
Concrete Manitoba says 100 mm (4 in) for a car driveway and 125 mm (5 in) for trucks or RVs. A floor on the ground must be at least 75 mm thick, says the building code. See the concrete slab calculator for thickness by job.
Wet concrete, steel, and why figures differ
Fresh concrete still holds its mixing water. So wet concrete weighs a little more than set (cured) concrete.
Eurocode 1, the European design code, adds 1 kN/m³ for wet concrete. That is about 100 kg more per m³: 2,500 kg, not 2,400 kg. Use the wet figure for a truck load. Use the set figure for the finished slab.
Reinforced concrete weight
Steel bars make concrete heavier. The Eurocode adds 1 kN/m³ for a normal amount of steel. So reinforced concrete is 25 kN/m³, about 2,500 kg per m³. We found no Canadian figure for it.
US figures you may see
The US home building code (IRC) uses 150 lb per cubic foot. That is close to our 149.8 lb.
Quikrete's US sheet gives 140 lb per cubic foot for its fresh bag mix. Each mix weighs a little different. For a real design, ask an engineer.
Questions people ask
How much does a yard of concrete weigh, wet or set?
About 4,045 lb (1,835 kg) once set. Fresh from the truck, it is about 4,214 lb, because the water has not dried out yet.
What does 1 cubic metre of concrete weigh?
About 2,400 kg, or 2.4 tonnes. That is the BC Building Code's figure for normal concrete, made with sand and gravel or stone.
How much does a cubic foot of concrete weigh?
About 149.8 lb, or 68 kg, once set. A US code uses 150 lb, almost the same.
What is the unit weight of concrete?
About 24 kN/m³ for normal concrete. Engineers call it the unit weight or specific weight. It is the same 2,400 kg per m³, written as a force.
How much does reinforced concrete weigh?
About 2,500 kg per m³, or 25 kN/m³. The Eurocode adds 1 kN/m³ for a normal amount of steel bars.
Is wet concrete heavier than dry concrete?
Yes, a little. Wet concrete weighs about 100 kg more per m³ than set concrete. The extra is water that dries out.
How much does a concrete slab weigh?
At 100 mm (4 in) thick, about 240 kg per m², or 50 lb per sq ft. Type your slab's size in the calculator.
Where our numbers come from
- Concrete 2,400 kg/m³: BC Building Code (NBC-based)
- CSA A23.3 concrete weight classes (via Bentley RAM manual)
- Eurocode concrete weight 24 kN/m³, +1 reinforced, +1 wet: NSC
- Reinforced concrete 2,500 kg/m³ = 25 kN/m³: VSB university notes on EN 1991
- Unit sizes: NIST Handbook 44, Appendix C (1 ft = 0.3048 m; 1 US gallon = 231 cubic inches)
- Driveways and garage slabs: Concrete Manitoba (thickness, base, steel)
- Floor slabs: BC Building Code 2018, Section 9.16 (at least 75 mm)
- Small-order and winter fees: Dufferin Concrete 2026 price list (Ontario)
- Bag size: Sakrete Canada Concrete Mix (30 kg makes 0.014 m³, or ½ cubic foot)
- Bag size: Quikrete Ready-to-Use 30 kg (½ cubic foot, 14 L)
- Rebar laps and wall weights: US home building code (IRC R608)
- Bag sizes and weight: Quikrete Concrete Mix data sheet
Made by BuildersCount. Last checked 14 Oct 2026.
How we work out our numbers About us Found a mistake? Tell us
Cite this page
BuildersCount. (2026, October 14). Concrete Weight Calculator. https://builderscount.com/ca/concrete-weight-calculator/