BuildersCount

Weight of Concrete per Cubic Metre

One cubic metre (m³) of concrete weighs about 2,400 kg once set. Find the weight of any amount, slab or load.

By BuildersCount · Last checked 14 Oct 2026 · Our sources

Type an amount

Which weight?

2,400 kg per m³: the Eurocode figure for plain concrete, once set.

It is in

We start at 2,400 kg per m³, the European code's figure for plain set concrete. Pick another weight above.

Your answer

That is about
2.4tonnes

1 m³ of concrete, plain, set (2,400 kg).

Volume

  • m³1
  • Litres1,000

Weight

  • kg2,400

If you buy bags

100
bags of 25 kg

This answer is a guide. Real weights change with the mix and the water in it. For anything that holds weight, check your local building rules or ask a builder or engineer.

Save or share

Quick answers

Weight of 1 m³ of concrete
About 2,400 kg, or 2.4 tonnes. That is the European code's figure for plain concrete, once set.
Tonnes of concrete in a cubic metre
About 2.4 tonnes set. Wet from a plant, or with steel bars, about 2.5 tonnes.
Unit weight in kN/m³
24 kN/m³ for plain concrete and 25 kN/m³ for reinforced concrete (Eurocode 1).
A 4 × 3 m slab, 100 mm thick
1.2 m³, so about 2,880 kg (2.88 tonnes) once set.
Bag mix, once set
At least 2,200 kg per m³, says Kilsaran's data sheet for its 25 kg bag.

How to work it out

  1. Find the volume: length × width × thickness, all in metres. This gives m³.
  2. Multiply the m³ by 2,400 kg. Use 2,500 kg for wet concrete or concrete with steel.
  3. Divide the kg by 1,000 to get tonnes.

A 4 × 3 m slab, 100 mm thick:
4 × 3 × 0.1 = 1.2 m³
1.2 × 2,400 = 2,880 kg
2,880 ÷ 1,000 = 2.88 tonnes

Concrete weight per m³: kg, tonnes and kN

Concrete has no single weight. It changes with the mix, the water and any steel. These are the figures we use, and who gives them.

What 1 m³ of concrete weighs
Concretekg per m³TonneskN/m³Who says
Plain concrete, set2,4002.424Eurocode 1
Wet concrete from a plant2,5002.5about 25Eurocode 1 (+1 kN)
Reinforced (with steel bars)2,5002.525Eurocode 1 (+1 kN)
Bag mix, set2,200 or more2.2+about 22+Kilsaran data sheet

1 kN/m³ is about 100 kg per m³: the code rounds gravity to 10. Kilsaran's figure is for its 25 kg bag mix.

Which one our calculator uses: it starts at 2,400 kg. That is the European code's figure for plain set concrete. It sits between the bag figure and the wet figure.

Use the wet figure for a lorry load or a barrow. Use the set figure for the finished slab. Engineers use the kN figure, which they call the unit weight.

Concrete weight chart: litres, bags and loads

This chart shows what common amounts weigh. We worked out each one from the code's set and wet figures.

What concrete weighs
AmountSet (2,400 kg/m³)Wet (2,500 kg/m³)
1 litre2.4 kg2.5 kg
What one 25 kg bag makes (0.01 m³)24 kg25 kg
1 cubic foot68 kg71 kg
1 cubic yard1,835 kg1,911 kg
A barrow load (1/35 of a m³)69 kg71 kg
1 m³2,400 kg (2.4 t)2,500 kg (2.5 t)
A 5 m³ load12 tonnes12.5 tonnes
A 6 m³ load14.4 tonnes15 tonnes

A barrow load uses a UK figure: Heidelberg Materials says about 35 loads to a m³. We found no Irish one.

Hanly calls 5 m³ or more a full load. Roadstone may charge extra under 6 m³. A 5–6 m³ load weighs 12.5 to 15 tonnes wet.

A 25 kg bag of Kilsaran mix makes about 0.01 m³. So about 100 bags make 1 m³.

How much does a concrete slab weigh?

A slab's weight depends on its size and how thick it is. At 2,400 kg per m³, each square metre weighs:

  • 100 mm thick: about 240 kg per m².
  • 150 mm thick: about 360 kg per m².
Slab weight at 2,400 kg per m³
SlabThickm³Weight
Shed base 3 × 2.5 m100 mm0.751,800 kg (1.8 t)
Patio 4 × 3 m100 mm1.22,880 kg (2.9 t)
House floor 10 × 8 m150 mm1228,800 kg (28.8 t)

Sizes are examples. Wet concrete or steel adds about 100 kg per m³.

Roadstone says many home slabs are 100 mm thick. TGD C asks for at least 150 mm under a house floor.

Weight of wet concrete and reinforced concrete

Fresh concrete still holds its mixing water. So wet concrete weighs a little more than set (cured) concrete.

Eurocode 1, the European design code, adds 1 kN/m³ for wet concrete. That is about 100 kg more per m³: 2,500 kg, not 2,400 kg.

Reinforced concrete weight

Steel bars make concrete heavier. The code adds 1 kN/m³ for a normal amount of steel. So reinforced concrete is 25 kN/m³, about 2,500 kg per m³.

VSB, a Czech technical school, agrees. Its notes give 2,500 kg per m³ as 25 kN/m³. The code's figure is for a normal amount of steel. For a real design, ask an engineer.

Questions people ask

What does a cubic metre of concrete weigh?

About 2,400 kg once set. That is the European code's figure for plain concrete. Wet concrete weighs about 2,500 kg.

How many tonnes of concrete are in a cubic metre?

About 2.4 tonnes of set concrete. A tonne of concrete is about 0.42 m³.

What weight is a cube of concrete?

A "cube" is 1 m³: a 1m × 1m × 1m block. It weighs about 2,400 kg (2.4 tonnes) set, or 2,500 kg wet.

What is the unit weight of concrete?

Eurocode 1 gives 24 kN/m³ for plain concrete. That is about 2,400 kg per m³. Engineers use it for the self weight of a slab or beam.

How much does reinforced concrete weigh?

About 2,500 kg per m³, or 25 kN/m³. The code adds 1 kN/m³ for a normal amount of steel bars.

Is wet concrete heavier than cured concrete?

Yes, a little. The code adds about 100 kg per m³ for wet concrete. Its water has not dried out yet.

How much does 1 metre of concrete weigh?

A cubic metre weighs about 2,400 kg. A square metre of slab, 100 mm thick, weighs about 240 kg.

Where our numbers come from

Made by BuildersCount. Last checked 14 Oct 2026.

Cite this page

BuildersCount. (2026, October 14). Weight of Concrete per Cubic Metre. https://builderscount.com/ie/concrete-weight/