Concrete Slab Calculator
Find the concrete, the stone base and the wire mesh for a slab or pad. Pick your job for its thickness.
Measure your project
Your answer
That is 88.0 cubic feet. We added 10% extra.
It weighs about 11,200 lb (5.6 tons) fresh. Quikrete's figure: 140 lb per cubic foot.
If you buy bags
One 80 lb bag makes 0.6 cubic feet of concrete.
If you order a truck (ready-mix)
Ask for 3.50 cubic yards. We round up to the next quarter yard.
This answer is a guide. For a driveway, floor or anything that holds weight, check your local building rules or ask a builder or engineer.
Which costs less?
You also skip mixing 147 bags by hand. Have the wooden edges (forms) ready before the truck comes.
Prices are US middle prices from October 2026. Ask your store for their price.
Quick answers
- Materials for a concrete slab
- The concrete, a stone base under it, and wire mesh if you use it. Turn on the base and mesh above to add them.
- Yards of concrete per square foot
- At 4 in thick, each square foot takes 0.333 cubic feet, or about 0.0123 cubic yards. One cubic yard covers about 81 sq ft.
- Thickness by job
- 4 in for a patio, walk, car driveway, garage floor or shed. 5 in or more for heavy trucks.
- Rebar in a concrete slab or patio
- The US home building code (IRC) has no rule that a slab on the ground needs steel. Some towns do. To count bars, use our rebar for slab calculator.
How to work it out
- Measure the length and width in feet. Multiply them for the square feet.
- Pick the thickness in inches. Divide by 12 to get feet.
- Square feet × thickness = cubic feet. Add 10% extra, then divide by 27 for cubic yards.
- Stone base: square feet × depth in feet ÷ 27. Times 1.33 for packing down, then times 1.4 for tons.
- Mesh: square feet ÷ 750 (one roll). Round up.
20 × 12 = 240 sq ft
240 × 4 ÷ 12 = 80 cubic feet
80 + 10% = 88 cubic feet ÷ 27 = 3.26 cubic yards
Or 88 ÷ 0.6 = 147 bags of 80 lb
Base, 4 in deep: 240 × 4 ÷ 12 ÷ 27 = 2.96 cubic yards packed
2.96 × 1.33 = 3.94 cubic yards loose × 1.4 = 5.52 tons
Mesh: 240 ÷ 750 = 0.32 → 1 roll
Concrete, base and mesh for common slabs
Each slab is 4 in thick, on a 4 in stone base. The calculator gives the same answers.
| Job and size | Concrete (cubic yards) | Crusher run (tons) | Mesh rolls |
|---|---|---|---|
| Small patio, 10 × 10 ft | 1.36 | 2.30 | 1 |
| Shed slab, 10 × 12 ft | 1.63 | 2.76 | 1 |
| 1-car garage slab, 12 × 20 ft | 3.26 | 5.52 | 1 |
| Typical patio, 16 × 18 ft | 3.91 | 6.62 | 1 |
| 2-car garage slab, 24 × 24 ft | 7.82 | 13.24 | 1 |
| 3-car garage slab, 36 × 24 ft | 11.73 | 19.86 | 2 |
Concrete: with 10% extra. Stone: packed 4 in deep, with no extra. Mesh: before overlaps.
These are common garage, shed and patio sizes, from makers and builders.
When can you walk or drive on it? See our concrete cure time page.
Know your square feet? See square feet in a yard of concrete for other thicknesses.
For the concrete alone in more sizes, see the size table on our concrete calculator.
Slab thickness by job
The thickness chips in the calculator use these figures. Here is who gives each one.
- 3½ in: a house floor, says the US home building code (IRC).
- 4 in: a patio or walk (Palatine, IL), a car driveway (County Ready Mix) or a garage floor (Wisconsin's code).
- 4 in for a shed: West Fargo, ND asks for at least 3½ in. We use 4 in, as for a patio.
- 5 in or more: garbage trucks and other heavy vehicles (County Ready Mix).
Your town may ask for more. Our concrete thickness guide explains each job and the gravel under it.
Crusher run under a concrete slab
Crusher run is crushed stone with its dust left in. The calculator gives tons and cubic yards.
Loose stone packs down. Penn State's road guide says 8 in of loose stone packs to 6 in. So we add 33% to the packed depth.
A loose cubic yard of crusher run weighs about 1.4 tons. That is the middle of the suppliers and road agencies we read.
We add no extra for spills to the stone. Our crusher run calculator starts at 10% extra, so its tons are higher. It also has prices.
Our thickness guide works out gravel instead. The US Army says to order 17% more gravel than its packed depth. Gravel packs down less, so those tons differ from these.
Under a house floor below ground level, the IRC asks for 4 in of clean sand, gravel or crushed stone. Crusher run has dust in it, so ask your supplier which stone fits your job. Our crushed stone calculator works out clean stone, such as #57.
Wire mesh for the slab
Wire mesh comes in rolls. A common roll is 5 × 150 ft, so it covers 750 sq ft.
The calculator divides your slab's area by 750 and rounds up. The pieces must overlap, so a slab close to 750 sq ft may need a second roll.
The right mesh depends on the slab's longest side, says the Wire Reinforcement Institute. Our rebar for slab calculator picks it, prices the rolls and counts steel bars.
A concrete slab foundation or floor
A house or garage floor on the ground is a slab too. Footings are the deeper strips under its walls. Use our footing calculator for them.
West Fargo, ND asks for a thicker edge on a shed or garage slab. It is 12 in deep and 12 in wide. Wisconsin's code wants a garage floor to slope to the main door or a drain.
For a price or a quote, use our concrete slab cost calculator. To mix your own from cement, sand and gravel, see our cement calculator.
For what a slab weighs, see concrete weight.
For a driveway, floor or anything that holds weight, check your local building rules or ask a builder or engineer.
Questions people ask
How much concrete do I need for a 10 × 10 slab?
At 4 in thick, the slab is 1.23 cubic yards. Buy 1.36 with 10% extra, or 62 bags of 80 lb. The 4 in stone base under it is about 2.30 tons.
How much concrete do I need for a patio?
A 16 × 18 ft patio, 4 in thick, takes about 3.91 cubic yards with 10% extra.
How much concrete do I need for a shed base?
A slab for a 10 × 12 ft shed, 4 in thick, takes about 1.63 cubic yards with 10% extra. That is 74 bags of 80 lb.
How much concrete do I need for a driveway?
A 1-car driveway, 12 × 24 ft and 4 in thick, takes about 3.91 cubic yards. A 2-car driveway, 24 × 24 ft, takes about 7.82. Both include 10% extra.
How many tons of crusher run go under a slab?
For each 100 sq ft, about 2.30 tons at 4 in deep, or 3.45 tons at 6 in. That allows for packing down, but adds no extra for spills.
How many rolls of wire mesh do I need for a slab?
Divide the slab's square feet by 750. That is one common 5 × 150 ft roll. Round up, and leave room for the overlaps.
How do I calculate concrete for a foundation?
A slab foundation uses the same formula as any slab: length × width × thickness. The footings under the walls are a separate sum, so use our footing calculator for them.
Where our numbers come from
- How thick: a ready-mix maker's driveway guide
- How thick: a town building handout (Palatine, IL)
- House floors: US home building code (IRC R506.1)
- Base under a slab: US home building code (IRC R506.2.2)
- Where bars go in a slab: US home building code (IRC R506.2.4)
- Sidewalk rule, Warren, Pennsylvania (mesh needed)
- Garage floor at least 4 in: Wisconsin code (Plover)
- Shed slab at least 3.5 in: West Fargo ND
- Crusher run weight: the middle of 9 suppliers and road agencies
- Packing down: Penn State road-stone guide (8 in loose packs to 6 in)
- Packing down: US Army earthmoving manual (FM 5-434)
- Other names for crusher run: state and supplier names (research)
- Crusher run: Palmetto Sand & Gravel (what a ton covers; free delivery from 15 tons; add 10%)
- Wire mesh price: the middle of 5 sellers (Oct 2026)
- Wire mesh by slab size: Wire Reinforcement Institute (TF 202)
- Bag sizes and weight: Quikrete Concrete Mix data sheet
- Extra for spills: Sakrete slab calculator (10%)
- Patio kit size: Nantucket Pavers (10 x 10 ft)
- Patio sizes by use: Signature Landscape, California
- Shed slab size: Heartland Sheds (same size as the shed)
- Shed pad size: Site Prep (gravel 12 in wider all round)
- Garage sizes for 1, 2 and 3 cars: Duramax
- Garage sizes for 1, 2 and 3 cars: Engineered Metal Buildings
- Concrete patio cost per sq ft by finish: Concrete Network (cost guide)
- Driveway widths: California Highway Design Manual
- Two-car driveway size (24 × 24 ft): Fixr (cost guide)
- Driveway width limits: City of Wheaton, Illinois
- Bag price: the middle price of 9 US stores (Oct 2026)
- Truck price: the middle price of 5 US concrete sellers (Oct 2026)
- Small-order fee: the middle of 3 US cost guides, and 3 plant price lists (2026)
Made by BuildersCount. Last checked 15 Oct 2026.
How we work out our numbers About us Found a mistake? Tell us
Cite this page
BuildersCount. (2026, October 15). Concrete Slab Calculator. https://builderscount.com/concrete-slab-calculator/