Asphalt Driveway Cost Calculator
Cost guides put the cost to install a new asphalt (blacktop) driveway at about $10 a sq ft. A 2-car driveway (24 × 24 ft) comes to about $5,760. Type your size to see the cost of each job.
Measure the area
Measure the driveway in feet. Leave out any part you are not working on.
Your answer
For 576 sq ft. Prices we found run from $2,258 to $8,640.
Prices change from town to town. For a new driveway, check your local building rules or ask a builder or engineer.
Prices we used
Cost guides' prices from 2022–2025, not quotes. We checked them in Oct 2026. They don't say if sales tax is in.
Quick answers
- Asphalt driveway installation cost
- About $10 a sq ft, the middle of only 3 cost guides (2022–2025). They range from $3.92 to $15, so treat it as rough.
- Asphalt price per ton
- About $95 a ton at the plant, before trucking. That is the middle of New York State's list of 128 plants. It is a state contract's top price; tax is not stated.
- Cost to resurface an asphalt driveway
- Fixr's 2025 cost guide says $4–$8 a sq ft for a new top layer. Its 2022 guide said about $2.50.
- Sealcoating cost
- Cost guides say $0.88–$2.10 a sq ft for a crew to seal it.
How to work it out
- Measure the length and width of the part you will pave, in feet. Multiply them for square feet.
- Multiply the square feet by the price per sq ft for your job.
- Replacing an old driveway? Add the cost to tear it out.
- Compare the answer with real quotes from local crews.
20 × 20 = 400 sq ft
New: 400 × $10 = $4,000
Tear out: 400 × $2 = $800
Replace in all: $4,000 + $800 = $4,800
Asphalt paving cost by job
These prices come from a few cost guides, not paving firms. They don't agree, so use them to check a quote.
| Job | Per sq ft | Range | From | 400 sq ft |
|---|---|---|---|---|
| New driveway | $10.00 | $3.92–$15 | 3 cost guides | $4,000 |
| Replace: tear out and lay new | $12.00 | $5.92–$17 | 3 guides + 1 for removal | $4,800 |
| Removing the old driveway | $2.00 | – | 1 cost guide | $800 |
| Resurface (overlay) | $6.00 | $2.50–$8 | Fixr, 2 pages | $2,400 |
| Sealcoat | $1.49 | $0.88–$2.10 | 3 cost guides | $596 |
New-driveway prices come from cost guides dated 2022–2025, checked Oct 2026. Resurface and sealcoat middles are worked out from the guides' ranges.
New driveway cost by size
| Size | Middle | Range |
|---|---|---|
| 1-car driveway (12 × 24 ft) | $2,880 | $1,129–$4,320 |
| 20 × 20 ft | $4,000 | $1,568–$6,000 |
| 2-car driveway (24 × 24 ft) | $5,760 | $2,258–$8,640 |
| 3-car driveway (30 × 24 ft) | $7,200 | $2,822–$10,800 |
| 1,000 sq ft | $10,000 | $3,920–$15,000 |
| 1,500 sq ft | $15,000 | $5,880–$22,500 |
$10 a sq ft, and the 3 guides' range of $3.92–$15.
What each cost guide says
| Cost guide | Per sq ft | 400 sq ft |
|---|---|---|
| LawnStarter (2025) | $3.92–$6.25 (average $5.09) | $1,568–$2,500 |
| Fixr (2022) | $7–$15 (most about $10) | $2,800–$6,000 |
| NerdWallet (2025) | $7–$15 | $2,800–$6,000 |
Third-party cost guides, with the year each was last updated. None says if tax is in.
Repaving an old driveway
To repave, a crew can lay a new top layer, called an overlay. The Colorado asphalt group says an overlay is 1.5–2 in thick.
Asphalt price per ton, per yard and per truck load
New York State's current plant list gives a middle price of $95 a ton for hot mix asphalt, top layer. That is the asphalt alone, picked up at the plant. It is a state contract's top price, and tax is not stated. Other states may differ.
- The lower layer mix on the same list is about $84.63 a ton.
- Laid on state roads, Kentucky's average bid was $105.11 a ton. Arkansas's was $98.74, with the binder billed apart.
- To patch an old road, Arkansas's average was $162.49 a ton.
- A tri-axle truck carries about 22 tons, a New York plant says. At $95 a ton, a load works out to about $2,090 before trucking.
- Recycled asphalt (millings): about $13.75 a ton, the middle of 4 prices from 3 sellers (few sellers). They run $10.25–$43.50 before sales tax (Oct 2026).
How much of the price is asphalt?
The Colorado asphalt group says a driveway is 3.5 in thick. The Asphalt Institute uses 110 lb per square yard for each inch. We worked out about $2.03 of asphalt per sq ft.
So the asphalt is about 20% of the $10 crew price. A 400 sq ft driveway takes about 8.6 tons.
Asphalt vs concrete driveway cost
Asphalt versus concrete: 2 cost guides price both kinds of driveway, per sq ft, installed.
| Cost guide | Asphalt | Plain concrete |
|---|---|---|
| LawnStarter | $3.92–$6.25 | $6–$16 |
| Fixr | $7–$15 | $6–$12 |
LawnStarter's concrete row is from its concrete driveway guide. Fixr's is a plain or broom finish.
Cost guides put a plain concrete driveway at about $8 a sq ft with labor ($6–$12). See concrete cost by job. Our $10 asphalt middle sits inside that range, so get quotes for both.
For concrete prices, see our concrete cost guide. For the asphalt and stone a driveway needs, use our asphalt driveway calculator.
What makes it cost more
- A bigger driveway.
- A thicker layer of asphalt.
- A deeper gravel base, mostly on soft or clay ground.
- Digging up an old driveway and taking it away.
- Grading, or taking out trees and stumps.
- A slope, or work to drain water away.
- Tight access, so the crew must work by hand.
- Extras like a pattern, heating, or asphalt that lets water through.
- A permit, if your town needs one.
- Sealing it again in later years.
Questions to ask before you hire
- How thick is the asphalt once packed down?
- How deep is the gravel base, and how is it packed?
- Will you remove the old paving or topsoil and take it away?
- Where will the water drain to?
- Will you give a written contract that names the asphalt mix?
- Can you show local jobs, your license, insurance and a warranty?
From Maryland Asphalt Association and LawnStarter.
Questions people ask
How much does asphalt cost per square foot?
About $10 a sq ft for a new driveway, laid by a crew. That is the middle of 3 cost guides, which run $3.92–$15.
How much does it cost to have an asphalt driveway put in?
A 20 × 20 ft driveway is about $4,000, at $10 a sq ft. Fixr's 2022 guide gives a typical price of about $10 a sq ft.
How much does it cost to replace an asphalt driveway?
Add the cost to tear out the old one. Fixr's 2022 guide says about $2 a sq ft. So a 400 sq ft driveway is about $4,800 in all.
How much does it cost to seal or reseal an asphalt driveway?
About $0.88–$2.10 a sq ft, by 3 cost guides. For 400 sq ft, that is $352–$840.
How much does a ton of asphalt cost?
About $95 at the plant, from New York State's list. That is a state contract's top price, and tax is not stated. Kentucky's average bid for asphalt laid on state roads was $105.11 a ton.
How much is asphalt per yard?
About $188.10 a cubic yard once laid and rolled, at the plant price. That uses 1.98 tons for a rolled cubic yard. It is before trucking and laying.
Is an asphalt driveway expensive?
Cost guides put a new one at about $10 a sq ft, or $4,000 for 20 × 20 ft. In LawnStarter's guides, asphalt ($3.92–$6.25) overlaps with concrete ($6–$16). In Fixr's, the two overlap ($7–$15 against $6–$12).
Where our numbers come from
- Hired asphalt driveway price: the middle of 3 cost guides (about $10 a square foot)
- Asphalt driveway cost: LawnStarter cost guide (a third-party estimate)
- Driveway costs: Fixr cost guide (a third-party estimate)
- Driveway cost: NerdWallet guide (a third-party estimate)
- Resurfacing cost: Fixr sealing cost guide (a third-party estimate)
- Hired sealcoating price: Angi, HomeGuide and Fixr cost guides
- Asphalt price: New York State plant price list (128 plants, 2025–27)
- Asphalt weight: Asphalt Institute (110 lb per square yard per inch)
- Driveway thickness and care: Colorado Asphalt Pavement Association
- Asphalt placed on Kentucky state road jobs: average bid price
- Asphalt on Arkansas state road jobs: weighted average bid prices
- Tri-axle truck about 22 tons: Gernatt Asphalt (NY)
- Concrete driveway cost per sq ft: LawnStarter (cost guide)
- Concrete driveway cost per sq ft by finish: Fixr (cost guide)
- Concrete driveway cost per sq ft: HomeGuide (cost guide)
- Driveway repair and replacement costs: This Old House (cost guide)
- Driveway widths: California Highway Design Manual
- Two-car driveway size (24 × 24 ft): Fixr (cost guide)
- Driveway width limits: City of Wheaton, Illinois
- Asphalt driveway advice: Maryland Asphalt Association design guide
- Asphalt driveway cost factors: LawnStarter (cost guide)
- Asphalt millings price: State Crushing, Michigan ($10.25 a ton)
- Asphalt millings price: Finger Lakes Stone, New York ($15 a ton)
- Asphalt millings price: Chesapeake Landscape Materials, MD
Made by BuildersCount. Last checked 15 Oct 2026.
How we work out our numbers About us Found a mistake? Tell us
Cite this page
BuildersCount. (2026, October 15). Asphalt Driveway Cost Calculator. https://builderscount.com/asphalt-cost/