BuildersCount

Stone Weight Calculator

Find what a yard, a ton or a block of stone weighs. Pick the rock, then type an amount or measure it.

By BuildersCount · Last checked 4 Oct 2026 · Our sources

Type an amount

Which stone or rock?

Not lava rock, which is much lighter.

It is in

Your answer

That is about
2,500lb

1 cubic yard of landscape rock.

Volume

  • Cubic yards1
  • Cubic feet27

Weight

  • Tons1.25

This answer is a guide. Rock weights change with the stone, its size and how wet it is.

Save or share

Quick answers

How much a yard of rock weighs
About 2,500 lb (1.25 tons) of landscape or river rock. Crushed stone is about 2,700 lb.
Tons of stone in a cubic yard
About 1.35 tons of crushed stone, or 1.25 tons of landscape rock.
Cubic yards of rock in a ton
About 0.8 cubic yards of landscape or river rock, or 0.74 of crushed stone.
Weight of limestone per cubic foot
Solid limestone is about 160 lb. Crushed limestone is about 85–90 lb, because a loose pile is part air.
Weight of a bag of river rock
Lowe’s sells 0.5 cubic foot bags of 44–47 lb. Vigoro creek rock is 40 lb a bag.

How to work it out

  1. For loose rock, find the tons in one cubic yard in the table below.
  2. Multiply by your cubic yards, then by 2,000 for pounds.
  3. For a solid block, multiply length × width × height, all in feet. This gives cubic feet.
  4. Multiply the cubic feet by the pounds in one cubic foot.

A limestone block, 2 × 1 × 1 ft
2 × 1 × 1 = 2 cubic feet
2 × 160 = 320 lb

Rock weight per cubic yard, by type

Landscape rock, river rock and crushed stone weigh 1.25–1.35 tons a cubic yard. Rip rap is heavier, and lava rock is much lighter.

What 1 cubic yard of loose stone weighs
StonePoundsTonsPounds per cubic footCubic yards in 1 ton
Landscape rock2,5001.25930.8
River rock2,5001.25930.8
Crushed stone (#57)2,7001.351000.74
Crushed limestone2,7001.351000.74
Screenings (crusher fines)3,0001.51110.67
Decomposed granite2,6001.3960.77
Rip rap3,3001.651220.61
Drain rock2,8351.421050.71
Lava rock (1 seller)1,5000.75561.33

Loose, as delivered. The sources are named below.

Landscape and river rock come from a rule of thumb used by Southwest Boulder & Stone. Crushed stone is from Caterpillar’s tables. Crushed limestone uses the same figure. Limestone-only figures are lower, at 1.15–1.25 tons.

Solid stone vs crushed stone

A solid block has no gaps, so it weighs far more than a pile. We use 160 lb a cubic foot for solid limestone. That is its unit weight, the pounds in one cubic foot.

  • Wicki Wholesale Stone, a New Jersey supplier, uses 165 lb a cubic foot.
  • The Indiana Limestone Institute puts Indiana limestone in Type II of ASTM C568, the medium weight class.
  • Crushed limestone is about 85–90 lb a cubic foot, from Tapco’s chart.
Weight of solid limestone blocks
BlockSizePounds (our figure)Pounds at Wicki’s 165
1 × 1 × 1 ft1 cubic foot160165
2 × 1 × 1 ft2 cubic feet320330
2 × 2 × 1 ft4 cubic feet640660
3 × 2 × 1 ft6 cubic feet960990

At 160 lb a cubic foot, and at 165 lb.

In metric, 160 lb a cubic foot is about 2,560 kg a cubic meter.

Other weights we saw came from search summaries we could not check, so we left them off. Our sources for solid limestone are few, so treat these as rough.

Rip rap, decomposed granite, drain rock and lava rock

Rip rap

Sources differ a lot. A Colorado supplier uses 1.65 tons a yard. Tennessee DOT uses 1.75 for its machined rip rap. A South Carolina yard uses 1.35.

Decomposed granite

Loose, it is about 1.3 tons a yard. Packed down, it is heavier: Southwest Boulder & Stone gets 100 sq ft at 2 in from 1 ton. That works out to about 1.62 tons a yard.

Drain rock and screenings

Graniterock, a California quarry, lists drain rock at 105 lb a cubic foot. It does not say if that is loose or packed.

Screenings, also called crusher fines, are about 1.5 tons a yard loose. Packed, they are 1.8, says Front Range.

Lava rock

Lava rock is much lighter than other rock. One seller lists a cubic yard at 1,500 lb. That is only 1 seller, so ask yours.

Tons of rock to cubic yards

Each ton of heavy rock fills less room. Divide your tons by the tons in one yard of that rock.

Cubic yards in a load of rock
LoadLandscape or river rockCrushed stoneRip rap
1 ton0.80.740.61
2 tons1.61.481.21
5 tons43.73.03
10 tons87.416.06
20 tons1614.8112.12

Loose cubic yards. No extra added.

Bags are smaller. A cubic yard of river rock fills 54 bags of 0.5 cubic feet.

To find how much rock covers a bed, use our stone calculator.

Questions people ask

How many cubic yards of rock are in a ton?

About 0.8 cubic yards of landscape or river rock. Heavier rock gives less: about 0.74 of crushed stone, and 0.61 of rip rap.

How much does a yard of stone weigh?

About 2,700 lb, or 1.35 tons, for crushed stone, in Caterpillar’s tables. Other sources give 1.2–1.4 tons.

How much does a yard of river rock weigh?

About 2,500 lb, or 1.25 tons. Bag labels work out to 1.08–1.27 tons a yard.

How much does half a yard of river rock weigh?

About 1,250 lb. That is 13.5 cubic feet, or 27 bags of 0.5 cubic feet.

How much does a yard of limestone weigh?

We use 1.35 tons for crushed limestone. Limestone-only figures run a bit lower, at 1.15–1.25 tons.

How much does limestone weigh per cubic foot?

We use 160 lb a cubic foot for a solid block. A stone supplier uses 165. Crushed limestone is about 85–90 lb, as a loose pile has air between the stones.

How do you calculate the weight of a stone?

Find its size in cubic feet: length × width × height in feet. Then multiply by its weight per cubic foot. Use the “Measure instead” button above.

Where our numbers come from

Made by BuildersCount. Last checked 4 Oct 2026.

Cite this page

BuildersCount. (2026, October 4). Stone Weight Calculator. https://builderscount.com/stone-weight-calculator/